Stagnation prevention

Drinking water hygiene has never been so convenient

To ensure the flawless functioning of a building installation, the planner has to take the maximum usage situation into consideration. In practice however this maximum usage is not the usual situation. Stagnating sections and insufficient hygiene in both the cold drinking water (PWC) and hot drinking water (PWH) can be the consequence. Changes in the use of the building or people within the building could have a similar effect. During the lifetime of a building, the actual frequency of withdrawals and volumes deviates strongly from the originally planned values. On top of that, the intended use is no longer guaranteed here.

The new KHS Hygiene Flush Boxes help restore the intended use through controlled “forced withdrawal”. Water exchange is controlled during this through the time, temperature and volume parameters.

KHS hygiene system

The KEMPER Hygiene System, KHS, prevents stagnation and the resultant impairment of drinking water quality. It ensures that fresh, hygienically perfect water is always available at every tap, taking into consideration efficiency and sustainability concerns. It offers every stakeholder, from the planner to the operator, from the installer to the end consumer, maximum security and safety in their daily contact with drinking water.


KHS LogoHygiene Flush BoxPRO

for large buildings with special hygiene requirements

PRO

  • Seven timer for individual flushing strategy in particularly hygiene-sensitive buildings
  • Interval, time, volume, temperature and usage-controlled flushing
  • Convenient and safe operation via WLAN (can be switched off) using the latest Access Point Technology
  • Up to 100,000 event entries to verify use as intended
  • Analysis and log readout via WLAN and USB
  • Flushing process management detects savings potentials and suggests improvements
  • Networking of up to 60 hygiene flush boxes possible

KHS LogoHygiene Flush BoxPURE

for time-controlled interval flushing operation in small buildings

PURE

  • Interval controlled flushing
  • Commissioned in less than a minute
  • Up to 100,000 event entries to verify use as intended (readout via USB)
  • Automatic detection and checking of all functional components
  • Optional upgrade to PRO

KHS LogoHygiene Flush BoxLITE

for safety-sensitive buildings

LITE

  • No integrated controller logic
  • Own control for direct connection to building automation systems / BMS

Installation and assembly options

One Hygiene Flush Box for all purposes

KEMPER Hygiene Flush Boxes can be installed surface-mounted or flush-mounted without additional accessories. Thanks to the innovative housing concept, all versions of the Hygiene Flush Box can be either integrated almost invisibly flush-mounted into the wall structure or installed elegantly surfacemounted on the wall.

What‘s more, the technology behind the Hygiene Flush Boxes is so sophisticated that comfort is assured – to maintain intended use, the controlled water exchange is ultraquiet.

Installation options

Practically invisible when flush mounted
// integration in the backsplash

Practically invisible when flush mounted
// integration in drywall plasterboard

Elegant when surface-mounted
// due to compact design
// no accessories necessary
// Networking of several Hygiene Flush Boxes using
KHS Mini-Control System MASTER 2.0
// Installation on a solid wall

 

 

Quick guide of operating modes

 Operating modeDescriptionFlush box
Time flushingInterval controlTriggers a water exchange of defined
duration after a selected time period has
elapsed.
PRO
PURE
LITE*
Time controlTriggers a water exchange of defined
duration on specified days of the week
and times.
PRO
LITE*
Volume controlTriggers a water exchange with a defined
flushing volume on specified days of the
week and times.
PRO
LITE *
Temperature flushing**Temperature controlTriggers a water exchange when a
predefined start temperature is reached
(e.g. 25°C) until a predefined stop temperature
is reached (e.g. 23°C).
PRO
LITE*
Usage-based controlSuspension of an upcoming water
exchange after detection of an instance of
use.
PRO
LITE*
*depending on external flushing logic
**only possible with additional temperature sensor Pt1000

Quick guide to KHS Hygiene Flush Box

Compare models at a glance

 
PRO
KHS Hygiene Flush
Box PRO
PURE
KHS Hygiene Flush
Box PURE
LITE
KHS Hygiene Flush
Box LITE
Operating models 
Time controlx x*
Interval controlxxx*
Volume controlx x*
Temperature controlx x*
Usage-orientated controlx x*
Control 
Operation via WLAN (can be deactivated) using Access Point Technologyx  
Operation via the controller x 
CAN bus networking possiblex  
Incorporation into BMS (BACnet & Modbus) via KEMPER Hygiene System KHSx  
Direct control via BMS (24V/4-20 mA)  x
Integration in BMS via digital I/Ox  
Potential free contact for fault messagingxxx
Features 
Digital assistant for commissioning and maintenancex  
Automatic functional testing of all components (24/7)x  
Data storage (up to 100,000 event entries)xx 
Data transfer via USB interfacexx 
Data transfer via WLANx  
Visualised flushing historyx  
Planning / calculation via Dendrit STUDIO 2.0 (2019K) SP2 - from June 2020xxx
* depending on external flushing logic 

An economically viable version for every building:

 
PRO
KHS Hygiene Flush
Box PRO
PURE
KHS Hygiene Flush
Box PURE
LITE
KHS Hygiene Flush
Box LITE
Hospitalsx (x)
Care facilitiesx  
Geriatric carex  
Residential buildingsxx 
Halls of residencexx 
Hotelsx  
Detention centresx (x)
Accommodation blocks (e.g. military)x (x)
Schoolsxx 
Sports facilitiesxx 
Kindergartensxx 
Laboratoriesx  
Industrial buildingsx (x)
Department storesx (x)
Swimming poolsx  
Interim solutions x 
(x) needs external control 

Data sheets

You find all technical informations in our product catalogue

Video Tutorials

kleines Kontaktformular (EN)

Ihre Daten
Nachricht